Libra Cold Pressed Whole Slow Juicer Machine | 48 RPM slow pressed juicer |240 Watts Powerful Motor for All Fruits and Vegetables | Free Recipe Book(Silver)

Description

Price: ₹23,999 - ₹10,999.00
(as of Jul 04, 2024 04:26:26 UTC – Details)

Product Description

Quick Assembly – Note Machine will start only after proper assembly.

Cold Press Juicer Assembly Step1/2/3

Step 1 – Insert Silicone plug under the bowl

Step 2 – Insert Juice extractor inside the holder

Step 3 – Place strainer-wiper set in the bowl.

Cold Press Juicer Assembly Step4/5/6

Step 4 – Place the auger inside the container

Step 5 – Rotate the Auger to ensure proper fixing

Step 6 – Place the lid on the bowl by matching the position.

Cold Press Juicer Assembly Step 7/8/9/10

Step 7 – Place the top set on the body

Step 8 – Ensure it is safely aligned.

Step 9 – Insert the pusher after putting the fruit or vegetables

Step 10 – Place the juice and pulp container at respective outlets.

FOR DETAILED INSTRUCTION REFER INSTRUCTION MANUAL

PLEASE FOLLOW THE LIST OF ITEMS BELOW BEFORE PUTTING THEM IN THE JUICER

For certain hard fruits and vegetables, like carrot, potato, beetroot etc it is advisable to cut in 4 vertical pieces and soak for 20 minutes before putting in the cold press juicer.

For fibrous / tough leafy ingredients like celerey, kale, pineapple, spinach etc, cut the outer stem to 2 inches long or less and juice along with hard ingredients for best results.

IT IS RECOMMENDED TO QUICK RINSING AFTER EVERY JUICING SESSION.

Close the top cap and fill with 400 ml of water

Press the ON switch and let the machine run for 1 minute

Switch off the machine and open the top lid

Repeat the step 1-2-3 at least twice.

Please make sure to clean all the parts individually after juicing.

For more details refer the Users Manual

COLD PRESSED TECHNOLOGY

The Cold press process ensures maximum juice extraction and nutrients retention which providing dense juices.

LARGE FEEDING CHUTE

The large 75mm ( 3 inches )feeding chute in the juicer can process an entire apple or orange so you don’t have to worry about chopping the fruit first.

REVERSE FUNCTION FOR SMOOTH FUNCTIONING

In case any pulp gets clogged in the juicer, the Reverse Button helps in reversing the process to throw out the pulp for smooth functioning.

AUGER / BLADE

The strong auger of the cold press juicer extracts the maximum contents leaving very low wastage of the fruit/vegetable.

FILTER

The filter of the slow juicer is made from stainless steel 304 for long life.

SAFETY LOCK

The Slow juicer does not start till the lid is locked properly.

RECIPE BOOK

Along with the slow juicer you get a juicer recipe book with recipe for exotic and plain juices.

Libra cold press juicer comes with 75 mm large feeding tube to load the whole ingredients (You can drop a full apple/orange in the feeding tube). It has a patented LMXQ technology for guaranteed maximum yield, at least 10% more juice than any other cold press juicer.
The 240-watt Libra slow juicer runs at 48 RPM retaining all nutrients, enzymes and yields in juices. Libra cold press juicer is a great electric fruit and vegetable juicer and proves to be a strong slow juicer that can crush hard ingredients like carrots and pears.
Libra electric slow juicer is super easy & convenient in everyday usage because of upgraded “juicing bowl with silicon free technology”. Libra cold press juicer comes with “improved Auger” for faster and easier juice extraction and gives dense juice with practically no air bubbles. Almost no oxidation, and stays fresh longer.
Libra slow juicer takes only 1 minutes to clean the cold press juicer, pour 300 ml water and run the unit, most pulp on the strainer will be cleaned. Unique cleaning patented round rotary brush to easily clean fibres from strainer pores within seconds.
Libra cold press juicer has all plastic parts made from 100% BPA free and made with the superior quality of materials: Slow juicer Auger is made up of Ultem plastic (spacecraft material), cold press juicer bowl is made up of BPA-free tritan plastic (-15°C to +85°C), slow juicer’s cold pressed strainers are made up of stainless steel 304 and Ultem PEI plastic.
Warranty for the Libra slow juicer is warranted for 1 Year. Any damages resulting from misuse of the product are not covered.